Pressure hose Ford Fiesta ST180/ ST200 Mk.7
* Prices incl. VAT plus shipping costs
- Article number: HGSIDSFOST180-s
This silicone pressure hose from Silicone Factory Hoses replaces the standard charge pressure hose from the pressure pipe to the intercooler on the Ford Fiesta ST 180/200.
It is the perfect solution to improve throttle response or power loss caused by porous or overloaded stock hoses. Even with standard performance, the original pressure hoses are at their load limit due to high engine compartment temperatures and the constant pressure fluctuations caused by load changes.
In addition, the ageing of the original hoses and/or boost pressure increases as a result of performance enhancements can lead to leaks and performance losses or even engine damage.
This hose is the perfect complement in combination with our HF-Series aluminium pressure tube and is also even cheaper in the set: Click Here
Our silicone high-performance hoses can effectively prevent this and also even mobilise power reserves, as the hoses do not expand even at high boost pressures and thus less filling volume has to be delivered by the turbocharger. This leads to a significantly better response behaviour.
Connections: 1x60mm / 1x75mm
SF-Hoses:
Our silicone hoses of SF-Hoses offer the perfect solution for the replacement of original hoses in all areas.
Whether for cars, motorcycles, trucks, boats, or in general use around combustion engines - our silicone works as water, pressure or suction hoses.
Often the problem with original hoses is that they become porous due to daily stress, which can lead to cracking or even bursting.
The multi-layer, fabric-reinforced silicone of SF-Hoses not only improves the visual appearance, but also, for example, better response behaviour, higher pressure resistance and a durability that is hard to beat.
Furthermore, these hoses are temperature resistant up to approx. 220°C, pressure stable up to approx. 6 bar and can be used in almost all areas, as they are available in diameters from 6mm to 127mm, as straight hoses or in angles from 45° to 180°.
All these factors make every article of SF-Hoses a top product, which should not be missing in any vehicle.
following models:
Ford Fiesta MK7 (JA8) ST180 1.6 134 kW (182HP)
Ford Fiesta MK7 (JA8) ST200 1.6 147 kW (200HP)
(Attention: Not suitable with the HF-Series intercooler)