Diverter valve hose kit VAG 1.8 T 20V 150/180HP

Diverter valve hose kit VAG 1.8 T 20V 150/180HP

€169.00 *

Net price: €142.02 VAT €26.98

* Prices incl. VAT plus shipping costs

Delivery country

Please choose a variant first

Article number: HGSIDSSUVK1-s

An SUV kit is in principle a back pressure bypass that serves to ensure that the boost... more

Close menu

sf_logo_blau

An SUV kit is in principle a back pressure bypass that serves to ensure that the boost pressure is not slowed down when the throttle closes.

Advantage with ours:

The back pressure is diverted directly in front of the throttle. Since the valve in our system is after the intercooler, only the cold air is circulated. The SUV is standard in many engines before the intercooler and thus only hot uncooled air is circulated.

This high performance Silicone Hose Kit from Silicone Factory Hoses is the perfect solution to prevent power loss caused by slow damage to the standard recirculation (bypass) valve. The standard diaphragm valve is installed in a very hot region in the engine compartment and is damaged over time by the permanent heat so that it leaks.

A leaking valve will result in poorer response and power losses, which is not immediately noticed in most cases, as the damage is insidious and does not occur suddenly. As a result, you get used to a deteriorating response and loss of performance.

With the Silicone Factory Hoses Thrust Hose Kit, the valve can be relocated to cooler regions, which has the added benefit of eliminating heat damage and allowing cooler air to be returned to the intake system. The cooler the air, the higher the density and the higher the density, the better the cylinder filling, which also results in higher performance.

This recirculating air hose kit can be used both with the standard valve and with another recirculation valve with piston mechanism, which responds much better than the standard diaphragm valve.

Before installation

After installation

SF-Hoses:
Our silicone hoses of SF-Hoses offer the perfect solution for the replacement of original hoses in all areas.
Whether for cars, motorcycles, trucks, boats, or in general use around combustion engines - our silicone works as water, pressure or suction hoses.
Often the problem with original hoses is that they become porous due to daily stress, which can lead to cracking or even bursting.

The multi-layer, fabric-reinforced silicone of SF-Hoses not only improves the visual appearance, but also, for example, better response behaviour, higher pressure resistance and a durability that is hard to beat.

Furthermore, these hoses are temperature resistant up to approx. 220°C, pressure stable up to approx. 6 bar and can be used in almost all areas, as they are available in diameters from 6mm to 127mm, as straight hoses or in angles from 45° to 180°.
All these factors make every article of SF-Hoses a top product, which should not be missing in any vehicle.

Close menu

following 1.8T 20V with 150/180HP:

Audi A3 8L

Audi TT 8N

VW Golf Mk4

VW New Beetle 9C

Seat Leon 1M

Not suitable for VW Polo and Seat Ibiza.