Catch Can set 2.5 TFSI Audi RS3 8V/ TTRS 8S 400HP

No corking of the intake valves and intake manifold flaps and all that without Bedi cleaning? And no loss of performance? Our TFSI Catch Can Set for 2.5 TFSI engines is the solution.

Advantages:
- Oil steam is led into the catch tank and collected there
- No corking of the intake manifold flaps and intake valves
- Clean combustion, as less oil is burned
- No loss of performance
- Cleaner combustion
- Fits with original intake/engine cover
- Fits at all FWD & AWD cars
- the hoses are already prefabricated in the correct length and the connections are pre-assembled
- the OEM sealing can be taken over/ does not have to be modified

Disadvantage without Catch Tank:
- valve corking -> valve rupture -> this in turn can cause engine damage
- loss of performance -> rough running at idle

Technical details:
- Catch tank with chamber construction incl. sinter filter
- Black steel flex pipes with racing fittings
- Tank capacity: about 450 ml
- CNC milled PCV Fix
- Black anodized
- Plug&Play set without adjustment work

Delivery content:
- Catch Can Set incl. mounting parts

Regularly, the oil and water steams are directed into the intake manifold, where they are ignited and ejected after entering the combustion chamber in combination with the fuel-air mixture.

The direct injection system of the TSI models means that the cylinder heads and valves are no longer flushed with fuel.
This means that the fuel normally used for cleaning is missing because it is injected directly into the combustion chamber.
As a result, massive dirt builds up through the exhaust gas recirculation in conjunction with the oil and water steams from the crankcase ventilation.
These are deposited on the chambers of the cylinder heads and on the valves.

Due to these depositions (corking), the material surface becomes rough, the air guide cross-sections narrow and neither optimal air turbulence nor optimal cylinder filling is achieved, nor optimal cylinder filling.

If the corking is still slight, the performance will initially be noticeably reduced and a rough idle will occur.
This is accompanied by worse exhaust gas values and higher consumption.

In the advanced stage, even the valve train is disturbed by these corkings in such a way that the valves partially no longer close and as a result there is no compression on the affected cylinders, which leads to misfiring.
The corking can also cause the valves to break off.
In the worst case, this can cause engine damage.

The Catch Can Set from HF-Series solves this problem once and for all.

A Catch Tank System does not lead the oil steams produced during engine operation to the intake tract.
The oil steam is led into the Catch Tank and collected there. As a result, valve corking is reduced.
This reduction leads to better engine running and ultimately to the best possible restoration of the original performance.
In addition, the installation of the system makes combustion cleaner.

Despite the diversion of oil and water steam into the catch can, the emission values (Euronorm) are still kept.